Hach-lange HQD System Features Quick Reference Card Bedienungsanleitung PDF herunterladen

HQ40D44

Edition 2 February 2006

Install the Batteries

1. Open the battery cover.

2. Install the batteries according to the

polarity markings on the meter.

3. Close the battery cover.

Turn on the Meter

1. Turn on the meter to set the date

and time.

2. If there is no power, check the

batteries.

3. Follow the on-screen instructions to

set the date and time on the meter.

CAUTION

Do not connect the IntelliCAL™ probe

to the HQd Meter until the correct

date and time are set in the meter.

Refer to the meter manual (Cat. No.

HQ40d18) for help with setting the

date and time.

Connect the IntelliCAL™

Probe

1. Align the connectors.

2. Tighten the cap on the probe to

fasten the probe to the meter.

3. Use the color-coded probe clips for

easy identification.

Take a Reading

1. Press the GREEN/RIGHT key.

2. For the most accurate

measurements, calibrate the probe.

See the HQ Series Portable Meters

User Manual for instructions.

1 2

Inhaltsverzeichnis

Seite 1 - Take a Reading

HQ40D44Edition 2 February 2006Install the Batteries1. Open the battery cover.2. Install the batteries according to the polarity markings on the meter.

Seite 2 - HQ d System Features

HQ d System FeaturesDiscover the Benefits• Sample ID and operator IDs• Pre-calibrated IntelliCAL™ probes• Serial number associated with readings• Cali